The components of the shelf mainly include basic components such as columns, beams, and layers. Specifically, the shelf is usually composed of components such as column pieces, beams, and layers. The column piece is the main supporting structure of the shelf, the beam is used to connect the column piece, and the layer is used to place the goods.
Composition of components of different types of shelves
Medium-sized shelves: composed of column pieces (select the size according to the load capacity), beams (such as square beams, ladder beams), layers (wooden boards, steel plates), cross beams (used when the shelf is too wide), etc. This type of shelf is mainly used for goods with a layer weight of less than 500KG, such as cartons, spare parts, etc. .
Beam-type shelves: composed of columns (select the size according to the load capacity), beams (square beams, clasping beams, clasping beams), cross beams (depending on the specifications of the pallet), etc. This type of shelf is mainly used for pallet storage, with strong selectivity and first-in-first-out characteristics.
Mold rack: It is composed of column pieces (channel steel), drawer boards (steel plates), brackets (angle irons), slides, bearings, etc. This type of shelf is mainly used to store various types of molds, and is often divided into drawer-type mold racks, fully open mold racks, telescopic mold racks, etc. Welded shelves: Made of corner welding, mainly used to carry goods within 200KG. Cantilever shelves: It is composed of columns, bases, cantilever beams, horizontal and diagonal pull rods, etc. This type of shelf is generally used to store longer goods, such as profiles, plates, etc. Installation steps Erect a column piece, insert two beams at the bottom butterfly hole and pay attention to alignment. Erect another column piece, insert the beam in the same way and pay attention to alignment. Insert the remaining beams in sequence according to the required layer height and pay attention to alignment. Put the layers on the P-beam in sequence to complete the installation
